|
Notes on Honda power steering system
checks
Fluid Replacement
Note: Use Genuine Honda Power Steering Fluid. Using other manufacturer's
fluid marked safe for use in Honda is not recommended.
1. Disconnect the return hose at the reservior. Put the end to a container.
2. Start engine, idle, and turn wheel lock-to-lock several times. Shut off
engine when fluid stops running out.
3. Refit the return hose, fill fluid to upper mark and start engine. At high
idle, turn wheel lock to lock to bleed trapped air.
After you have installed the the system with new fluid and theleaking
problem still persist, click here,
and we will guide you through troubleshooting.
Caution: Do not fill the reservior beyond the upper mark. |
|